|
|
 |
Customer CTQs - Defining Defect, Unit and Opportunity
|
|
|
|
|
|
|
|
|
|
|
|
"Look at everytime a machining process changes the product toward its final state. For example, the product goes through a broaching operation, it is changed - one opportunity. The product is transported or stored or mounted or tested, it is not changed - no opportunity. In the case of complex tools, count opportunities as if each thing done by the complex tool was done by single simple tools."
Contribute to this Discussion
|
|
|
|
<P>By Kerri SimonIn order for any process capability to accurately be calculated, one must properly define and quantify the process defect, unit and opportunity. Every process should have definitions for defect, unit and opportunity. This article will define the defects, units and opportunities, as well as provide examples. Start With The Customer
Before you can define your process defects, units and opportunities, you need to understand the needs of your customers. Voice of the Customer (Customer Needs, eSurveys, Focus Groups, Surveys) is the process of gathering customer comments/quotes and translating them into issues and specifications. From these comments, issues and specifications come the customer CTQ (Critical To Quality) – a product or service characteristic that must be met to satisfy a customer specification or requirement. Define Your Product/Service Defects
A defect is defined as any part of a product or service that: - does not meet customer specifications or requirements, or
- causes customer dissatisfaction, or
- does not fulfill the functional or physical requirements.
It should be noted that the term customer refers to both internal and external customers. Define Your Product/Service Units
A unit is something that can be quantified by a customer. It is a measurable and observable output of your business process. It may manifest itself as a physical unit or, if a service, it may have specific start and stop points. Define Your Product/Service Opportunities
Simply stated, opportunities are the total number of chances per unit to have a defect. Each opportunity must be independent of other opportunities and, like a unit, must be measurable and observable. The final requirement of an opportunity is that it directly relates to the customer CTQ (see Start With The Customer above). The total count of opportunities indicates the complexity of a product or service. CTQ Examples Including Defect, Unit and OpportunityArea: Call Center
Customer Quote: 'I consistently wait too long to speak to a representative.'
CTQ Name: Representative Responsiveness
CTQ Measure: Time on hold (seconds)
CTQ Specification: Less than 60 seconds from call connection to the automated response system
Defect: Calls with hold time equal and greater than 60 seconds
Unit: Call
Opportunity: 1 per call  | Calculate Your Sigma (Plug in the values below to calculate Sigma) | | Defects: 263 calls | | Units: 21,501 calls | | Opportunities: 1 per call | | Sigma: 3.75 |
Area: Book Publisher
Customer Quote: 'I can't stand typos in books I purchase.'
CTQ Name: Typographic Quality
CTQ Measure: Number of typographical mistakes
CTQ Specification: Zero typographical mistakes
Defect: Any typographical mistakes
Unit: A word
Opportunity: Words per book | Calculate Your Sigma (Plug in the values below to calculate Sigma) | | Defects: 2 typographical mistakes | | Units: 100,000 (500 words/page x 200 pages/book) | | Opportunities: 1 per word | | Sigma: 5.61 |
Area: Printed Circuit Board Manufacturing
Customer Quote: 'Boards must work when I plug them in.'
CTQ Name: Board Functionality
CTQ Measure: Non-functioning or improperly functioning boards
CTQ Specification: All boards function properly (a board wil not function properly if any individual component is bad)
Defect: Any non-functioning or improperly functioning board
Unit: A board
Opportunity: Total number of parts plus solder points | Calculate Your Sigma (Plug in the values below to calculate Sigma) | | Defects: 18 boards | | Units: 1,000 boards | | Opportunities: 58 (1 board + 13 resistors + 4 capacitors + 2 diodes + 38 solder points) | | Sigma: 4.92 |
Copyright © 2000-2008 iSixSigma – All Rights Reserved
Reproduction Without Permission Is Strictly Prohibited – Copyright Requests
Publish an Article: Do you have a Six Sigma tip, learning or case study?
Share it with the largest community of Six Sigma professionals, and be recognized by your peers.
It's a great way to promote your expertise and/or build your resume. Read more about submitting an article.
"The Bottom Line" Links
|
| |
|
|
1BMG
UNIVERSITY.
|
I
I
|
|
I
I
|
• Reduce Travel Costs
• Maximize Training Budget
|
|
![]() |
|
|
![]() |
|
SIGMAPRO |
MBB, Lean Sigma, & DFSS
when
experience
matters
most...
|
|
![]() |
M O T O R O L A
U N I V E R S I T Y |
Learn from the most experienced
practitioners of Six Sigma in the world
Public Training & Certification
Click here to take a free Six Sigma Lesson
|
|
![]() |
|
JURΛN |
2009 Lean Six Sigma Public Workshops -
SPECIAL OFFER!
Register for any course before December 31st and receive 50% off any additional registrations, plus receive free
consulting support! Call 800-338-7726 to register. |
|
![]() |
|
LodeStar Institute |
| |
Live Lean Six Sigma Training
Starting at $660 |
|
|
WHY SETTLE FOR ONLINE? GET LIVE TRAINING AND PROJECT MENTORING FOR ONLINE PRICES. |
|
|
![]() |
Finding that key person for your
team is just a click away . . .
|
|
|
TheJobShop
jobs.isixsigma.com
|
|
|
|
|
|
![]() |
THE UNIVERSITY OF
TEXAS
AT AUSTIN |
|
2 weeks + 1 project = Black Belt Certification
|
|
|
![]() |
| . |
Find us on LinkedIn |
Join the iSixSigma Network
and Connect with Other Six Sigma Pros |
|
| . |
|
![]() |
| . |
iSixSigma Live! Summit & Awards
Jan 13-16, 2009 • Miami, FL |
Save up to $200.00 • Click Here!
Space is Limited! Hurry! |
|
| . |
|
|
|
|
