iSixSigma

ANOVA analysis

Six Sigma – iSixSigma Forums Old Forums General ANOVA analysis

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48231

    Jose
    Participant

    Please somebody could tell me how to perform an two ways ANOVA analysis using Minitab 15. I do not understand the table. How to introduce the data .
    This is the table: Distorsion of Gear (CTQ) based on Tooth Size (X1) and Part Positioning Part positioning
    Tooth size   x2 = low     x2 = high
    _______________________________________________________________
    x1 = low     18.0        13.5
              16.5        8.5
             26.0        11.5
             22.5        16.0
             21.5        -4.5
             21.0        4.0
             30.0        1.0
             24.5        9.0
    _____________________________________________________________
    x1 = HIgh    27.5        17.5
             19.5        11.5
             31.0        10.0
             27.0        1.0
             17.0        14.5
             14.0         3.5
             18.0         7.5
             17.5         6.5
    I am using the Book: Six Sigma for Green Belts and Champions. Howard Gitlow. Sometime I do not understand how they analyze some data.
    Some questions: Why in Japan companies do not use Six Sigma Methodology. I know Companies use almost the same tools use in Six Sigma, and Lean Six Sigma but the goal is the same, right ?.
    In a Six Sigma Company, I mean, companies that have successfully used Six Sigma, The use the same structure. This means: They have SS Green Belts, Black Belts, Champions, Master Grand Belts. What happen If one of them are in a Company. Could a Company apply SS ?….thanks so much for your help.
    Jose

    0
    #161796

    indresh
    Participant

    Pls send the same in soft copy format at [email protected]
    rgds
    Indresh

    0
Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘General’ is closed to new topics and replies.