iSixSigma

DFSS mapping

Six Sigma – iSixSigma Forums Old Forums General DFSS mapping

Viewing 34 posts - 1 through 34 (of 34 total)
  • Author
    Posts
  • #43628

    Chris Davis
    Participant

    Does anybody know of a good Design for Six Sigma or Design for Manufacturability mapping that I can get.  I am looking for a mapping that can help me present to management as well as a checklist for implementation.
    I would appreciate any help on this.

    0
    #138667

    Mike Carnell
    Participant

    Chris,
    I would check with the Statistical Design Institute (SDI) guys and see what they offer. They have the best Design stuff I have seen on the market.
    Good luck.

    0
    #138706

    IntelDesign
    Participant

    I took a DFSS class in my company given by ASC. This is the second class I have taken, and I was very impressed with the knowledge of Mario Perez-Wilson, who gave the second class. He gave us a map of the DFSS methodology and its tools. It is excellent. If you want a copy I can certainly send it to you. Just give me your email.Good luck with your presentation.

    0
    #138709

    GomezAdams
    Participant

    I’ll take one.
     
     
    michael dot walmsley dot b @ dayer dot com

    0
    #138712

    Bob Kirkwood
    Participant

    I’ll take a copy.
     
    [email protected]
     
    Thanks!!

    0
    #138715

    BTDT
    Participant

    IntelDesign:Please direct people to contact ASC directly rather than send copies of his intellectual property to third parties.http://www.mpcps.com/CUS0.php4Cheers, BTDT

    0
    #138717

    Dr. Eugene Jacquescoley
    Participant

    [email protected] look forward to your email.Many thanks.

    0
    #138722

    Third Party
    Member

    As an anonymous third party who could do anything conceivable with Mr. Mario Perez-Wilson’s intellectual property, but who will more than likely just do as the other requester’s will – simply look it over and retain it in my files for use in future presentations and articles, I’d very much like to get a copy of his DFSS methodology and tools.  Thanks in advance.
     
    [email protected]
     
     
    In fact, please forward any other slick and well thought-out intellectual property to my same Yahoo drop box while you’re at it.   Thanks again for your help.  

    0
    #138737

    TRAJ
    Member

    I will have a copy as well.
     
    Regards.

    0
    #138742

    leo
    Participant

    I will like to have a copy, thank you very much.
    [email protected]
    Best regards

    0
    #138744

    Pradeep Sharma
    Participant

    Hi IntelDesign,
    Hi can I also get a copy, if you dont mind, my e-mail ID is [email protected]
    Thanks,
    Pradeep Sharma

    0
    #138774

    Orang_Utan
    Participant

    I did conduct a supplier audit on Intel plant. Intel was very concerned on non-disclosure kinda stuff on their IP rights.
    How can Intel Design people deliberately distribute other people IP?

    0
    #138776

    BTDT
    Participant
    #138780

    Orang_Utan
    Participant

    Mario is a technical strong consultant since the early day of six sigma in Motorola. If people want to learn from him, just pay for it as I did. I bought two books from ACS, and they gave me a third book for free for their belated reply. :-)
    You shall know who am I? I changed my dog ID to orang_utan to standardize ID for all public forums in Chinese and English world.
    It’s ok for me to release Intel server detailed design and drawing to this public forum?   

    0
    #138859

    Chris Davis
    Participant

    BTDT
    Thank you for your input.  I reqeusted the DFSS map from Mr. Perez-Wilson by going to his website and they were very kind to send it to me without any cost, provided that I respected their copyrights.  The DFSS mapping is excellent.  But I noticed that he uses the IDOL approach, IDENTIFY, DESIGN, OPTIMIZE and LAUNCH, and it does make a lot of sense.
    I am making my presentation to my management tomorrow.
     
    BTDT, thanks for providing the website.

    0
    #138860

    BTDT
    Participant

    Chris:I’m pleased you contacted him. I’ve always found him to be very smart, experienced and approachable. He is a great person to have in your back pocket if management gives you too much push back.All the best tomorrow!Cheers, BTDT

    0
    #138863

    indresh
    Participant

    hi
    kindly send the DFSS map to me as well
    [email protected]
     
    thanks
    rgds
    indresh

    0
    #138939

    wenping
    Member

    So can I also have a copy? [email protected] thanks

    0
    #138940

    BGBB
    Participant

    Please add me to your mail list when you sent put the DFSS Mapping tools you discussed.
    Thanks in advance
    BGBB

    0
    #138942

    Edwards
    Participant

    Can I also have a copy if possible of that DFSS Mapping. thannx. my mail is [email protected]

    0
    #138946

    K.Mahadevan
    Participant

    hi
    kindly send the DFSS map to me as well
    [email protected]
    Thanks

    0
    #138947

    George Salazar
    Participant

    I would appreciate a copy if at all possible.
    Thanks
    George
    [email protected]

    0
    #138967

    Jeffrey WW Elliott
    Participant

    Please include me in the long list of those requesting the Mario Perez-Wilson DFSS map.  Thank you – I will respond in kind.

    0
    #138970

    Tim Martin
    Member

    I would like a copy of the DFSS methodology and tools. [email protected]

    0
    #138989

    patrick ng
    Participant

    Please include me in your mailing too… Thanks a million.
    Patrick

    0
    #139004

    Yan
    Member

    I would appreciate a copy if at all possible.
    [email protected]
    Thanks

    0
    #139035

    Syed Hussain
    Member

    I would appreciate getting a copy too.
    Thanks

    0
    #139038

    Ritz
    Member

    BTDT,
    Good try on the intellectual property – I’m with you.
    It appears that Integrity isn’t important with several people in this forum.  I used to hear people joke that the I in DMAIC didn’t stand for Integrity … it’s a shame to see it in action.
    Ritz

    0
    #139268

    R.Ramkumar
    Participant

    Can I have a copy. Thanks in advance

    0
    #139276

    garretzhang
    Participant

    Hi, dear, may I get a copy as well? thank u…
    [email protected]

    0
    #139278

    pakhi
    Participant

    hi
    kindly pls send the DFSS map to me as well
    [email protected]
    Thanks

    0
    #139281

    viswanathan v
    Member

    Hi, i too am interested. Could you please add me to the mailing list…[email protected] Also I am trying to start an online directory service for six sigma professionals. If interested mail me your contact details.
    Regrds
    V Viswanathan

    0
    #139286

    Pai
    Participant

    I would like to have a copy of the DFSS methodology and its tools posted to my id.Tx.
    [email protected]

    0
    #139299

    BBNEO
    Participant

    Hi Inteldesign,  send me a copy as well.  Thanks in advance.
    e-mail add: [email protected]
     

    0
Viewing 34 posts - 1 through 34 (of 34 total)

The forum ‘General’ is closed to new topics and replies.