iSixSigma

Explaining six sigma to team members

Six Sigma – iSixSigma Forums Old Forums General Explaining six sigma to team members

Viewing 70 posts - 1 through 70 (of 70 total)
  • Author
    Posts
  • #28709

    Hemanth
    Participant

    Hi,
    I am a BB. I am about to start a new project in a company where the concept of six sigma is still not known. I am planning to conduct a 30 min overview for the team members. I would be greatful if anyone who has done a project in a similar situation, and can give me some tips on how to go about it.
    thanks in advance.
     

    0
    #71831

    Ø6 Sigma BB Coordinator
    Participant

    I have Six Sigma overview presentation. However, it take 2 hours.
    Download: Introduction to Six Sigma [963Kb PowerPoint File]
    Viewing Tip: Usually, you can click on a link to view the document — it may open within your browser using the application (in this case Microsoft PowerPoint). If you are having difficulty, try right clicking the link and selecting “Save Target As…” or “Save As…” to save it to your computer harddrive.
    Download: Introduction to Six Sigma [844Kb Zipped File]
    Note: Due to the size or complexity of this submission, it is also provided as a .zip file to shorten your download time. After downloading it, you will need a program like Winzip to decompress it.
    Virus Note: All files are scanned prior to uploading to iSixSigma. No prevention program is entirely safe. FOR YOUR OWN SAFETY, PLEASE:1) Re-scan downloaded files using your personal virus checker before using it.2) NEVER, EVER run compiled files (.exe’s, .ocx’s, .dll’s etc.).If you don’t have a virus scanner, you can get one at many places on the net including McAfee.com.

    0
    #71832

    Tom Blackie
    Member

    I would love to see the presentation also — for use with my management team. Can you post it here for download?
    Thanks very much!
    Tom

    0
    #71872

    Reinier Olivier
    Participant

    Hi,
    I would also like to see your presentation. We are just starting with Six Sigma here in Nedcor.

    0
    #71873

    Suneel Khurmi
    Member

    Hemanth,
    I prepared and delivered an Executive Overview a couple of weeks ago to my management team and staff. It is a Powerpoint presentation (6.5MB), approximately 30 mins and went down well.
    If you want a copy, please email me.
    Best regards,
       Suneel
    Programme Manager, mi2g software Ltd.

    0
    #71874

    Anil Tiwari
    Participant

    Sunil,
    I am intrested in your pwerpoint slide, please send me on my mail.
    Thanks & Regards,
    Anil

    0
    #71877

    Agnes
    Participant

    Suneel,
    I’m very interested in having presentation material as I’m going to have such a kind of 6 sigma training to our middle management.  Would you please send me a copy.  Thanks in advance.
    Agnes

    0
    #71878

    Kevin gong
    Participant

    Dear Jaran
    I am verry interested in 6-Sigma, would you pls share me your presentation to me. Thanks a lot.
    [email protected]

    0
    #71879

    Kevin gong
    Participant

    Dear Suneel
    I would like to see your presentation, pls share me to [email protected]
    Thanks
    Kevin Gong
     

    0
    #71880

    D Ritter
    Participant

    Suneel,
    I am very interested in your presentation. Would appreciate if you mail it to me.
    Thanks
     

    0
    #71885

    Hetchner
    Member

    Hi Suneel,
    Can you post a copy to the forum instead…it just seems so inefficient to ask everyone to email you…
    Will

    0
    #71886

    Paul Field
    Participant

    Suneel
    I would also appreciate a copy of your presentation, it would be a great help to me with my new project.
    Regards
    Paul
    [email protected]
     

    0
    #71889

    Cannizzo
    Participant

    Hi Jaran,
    Can you please post your presentation to the isixsigma forum. I have a mail client that cannot accept large files, so it’s easier for me to download them. :)
    Thank you,
    Carol

    0
    #71891

    Johnny G
    Participant

    I have just been selected to become a BB; I haven’t started the training yet. However, I would greatly appreciate any presentational information/ programs to help with explanations of Six Sigma to my peers.
    e-mail: [email protected]
    Thanx in advance!!!

    0
    #71892

    Billie Jo Bagnell
    Participant

    I would love to see your presentation, could you please email to [email protected]
    I could not find your email address to email you separately.
    Thanks!!

    0
    #71895

    Damian
    Participant

    Dear Suneel

    I am the first BB in my company and have a need to provide an overview to both the team and managment.  Please send me a copy at [email protected].
    Thanks,Damian
     

    0
    #71899

    Go
    Participant

    I would love to see your presentation, too.
    Please send me a copy by mail.
    Thanks a lot
    [email protected]

    0
    #71903

    Steinar hjelle
    Member

    Dear Suneel

    I would like to see your presentation, pls send it to my e-mail address:
    [email protected]

    0
    #71904

    Carol Theros
    Participant

    Suneel,
    I would very much like a copy of your presentation. I am a black belt in training and six sigma is new to our company.  Thanks, Carol

    0
    #71906

    Katell Thieleman
    Participant

    Suneel-
    I’d love to see your presentation; could you please e-mail ([email protected]) ? The demand seems strong … mayeb it should be added to the site.
    Thanks in advance. 

    0
    #71908

    Kimberly Schulte
    Participant

    I would love to have a copy of the presentation emailed to me.
    Thanks very much,
    Kimberly Schulte
    BB for VFS

    0
    #71909

    Mark Almeter
    Participant

    Suneel –
    Could you provide me a copy of the presentation as well?  My e-mail is [email protected].
     
    Thanks,
     
    Mark

    0
    #71911

    Jan Wenning
    Participant

    Could you please include me when sending out a copy of your Executive Presentation.  Thank you.
    Email is:  [email protected]

    0
    #71912

    Brad M
    Participant

    Suneel,I would be greatly appreciative if you could e-mail me a copy of the Six Sigma presentation as well.Thanks in advance,blm [email protected]

    0
    #71914

    Cooke
    Member

    Suneel,
    A copy of the powerpoint presentation would come in very handy. Could you email me a copy? Thanks,
    Tracy

    0
    #71917

    Paul Whitaker
    Participant

    I have to agree with the masses, I too would love to see the presentation.

    0
    #71919

    Salvador Valles
    Member

    Sunnel 

    Would you please share me your presentation to me. Thanks a lot.
    I live in Chihuahua, Mex.
    Thanks in advance and best regards
    [email protected]

    0
    #71924

    Philip Corbett
    Participant

    I would greatly appreciate receiving your presentation.
    Thanks!
    [email protected]

    0
    #71925

    Paul Field
    Participant

    Suneel
    please can you re-send to [email protected] or [email protected]
    Thanks
    Paul
     
     
     
     

    0
    #71926

    Janie Satterfield
    Participant

    I am also interested in a copy of your presentation. Please post a copy at this site or email me a copy.  Thanks

    0
    #71927

    Ø6 Sigma BB Coordinator
    Participant

    I prefer to give it to you privately.
    Can you mail to me?
    Six Sigma Black Belt Coordinator

    0
    #71928

    MN
    Participant

    Hi,as every body seems to be interested in your “valuable  sixsigm”presentation,why not to facilitate access to it through this site,it will  much easier to send it to individuals,you will certainly be appreciated by every participants,thanks in advance,best regards. MN

    0
    #71929

    Ø6 Sigma BB Coordinator
    Participant

    I prefer to give it to you privately.
    Can you mail to me?
    Six Sigma Black Belt Coordinator

    0
    #71930

    C. S.
    Participant

    Would you mind sending another……….THANK YOU!
     
    [email protected]

    0
    #71936

    Don Barber
    Participant

    Please e-mail a copy of your presentation to me.  Thanks for your help.  

    0
    #71938

    Craig Lyman
    Participant

    Suneel – Would you please email me a copy of your presentation when you get a minute? Thank you.
     
    [email protected]

    0
    #71939

    Taylor
    Member

    Suneel,
       Could you please send me a copy of your Six Sigma presentation?  Thank you!   [email protected]
    Taylor Wickersham
    J and G Steel Corp

    0
    #71940

    udayan
    Member

    ya..our company has followed this approach of awareness program for six sigma.
    well first and foremost is prepare a shell document of all the dmaic and dmadv process and breifing them about all the steps that are involved.
    mostly people tend to compare sigama with cmm or kaizen or like wise the mindset has to be changed to make the point clear that noone says sigma is better that any other methods..only six sigma has the outside prospective which no other tools have …
    a case study can be a best approach…at the end of the awareness program and also some sample excersices like ..preparing charter,sipoc, writing ctqs..for some the proble statement…like wise..so that they gets hands on knowlege..six sigma cannot be understood by theory…u have to try it out…!!
     
    udayan
     

    0
    #71947

    Janet
    Participant

    Suneel, will you please email me your Power Point presentation? Thank you very much. Janet

    0
    #71950

    Saucke
    Participant

    Suneel, will you please email me your Power Point presentation?
    Thank you very much.
    Jeanne

    0
    #71957

    Matt M
    Participant

    Suneel what is your email address, I’d like a copy also.
    Thanks,Matt

    0
    #71962

    Hemanth
    Participant

    Hi suneel,
    I would love to have the presentation. I hope you wont mind if I take certain excerpts from your presentation.
    Thanks
    hemanth
     

    0
    #71965

    Dan Lane
    Participant

    This is more an explanation of simple metrics used than an explanation of six sigma, but it is a place to start.

    Explaining Metrics Download: Metrics 101
    Viewing Tip: Usually, you can click on a link to view the document — it may open within your browser using the application (in this case Microsoft PowerPoint). If you are having difficulty, try right clicking the link and selecting “Save Target As…” or “Save As…” to save it to your computer harddrive.Virus Note: All files are scanned prior to uploading to iSixSigma. No prevention program is entirely safe. FOR YOUR OWN SAFETY, PLEASE:1) Re-scan downloaded files using your personal virus checker before using it.2) NEVER, EVER run compiled files (.exe’s, .ocx’s, .dll’s etc.).If you don’t have a virus scanner, you can get one at many places on the net including McAfee.com.

    0
    #71968

    Rene Klerx
    Participant

    I really appreciate if you could send an electronic version to me via e-mail ([email protected])
     
    Thanks in advance
    Rene Klerx
    SKF Engineering & Research Centre, The Netherlands

    0
    #71995

    Tracy Sandell
    Member

    Suneel,
    I forgot to send you my email address.  Your presentation would be very much appreciated.
     
    [email protected]
     
    Thanks

    0
    #71997

    iSixSigma Community
    Participant

    The download is now available. A big thank you to Six Sigma Black Belt Coordinator for the submission…now please, stop all the postings asking for it to be emailed! :)
    https://www.isixsigma.com/forum/showmessage.asp?messageID=9147Don’t forget to check out the posting by Dan Lane entitled “Metrics 101” (thanks Dan!) at:https://www.isixsigma.com/forum/showmessage.asp?messageID=9300

    0
    #72037

    Nandini
    Participant

    Hi Hemant,
    I am Nandini, working as Six Sigma Coordinator (Quality Exec) for 4 years in Wipro.  Kust write to me, if you need any specific query, I will try to help you.
    With best regards, Nandini

    0
    #72042

    John Godson
    Participant

    Thank you for posting the presentation.
    It was extremly informative & useful.

    0
    #72073

    Hemanth
    Participant

    Thanks for your help.
    regards,
    Hemanth

    0
    #73581

    Ramiro R. Molina
    Participant

    My personal advice.  I personally do not think that a 30 minute presentation will get the team into 6-Sigma so easily.  At least, they should have a general exposure seminar, 2-3 days, going over the 6S roadmap, from the Define step through the Control (the well known DMAIC) step of the methodology.  Otherwise, you will spend many more hours during the development and excution of the project(s) without them knowing where they need to go.  Depending on the structure of the organization that you are in, you might want to give the general exposure seminar to the top management level and embark into a Green Belt seminar with your project team (I take that you are a BB already), one step of the DMAIC roadmap at a time; this way, eventhough you are investing (“spending”) more time up front, the results will come faster and the projects will be executed in less time, overall.

    0
    #73594

    Ang
    Participant

    HELP!!!!!!!!!!!!!!!!!!!!!!!!!
    The guy asked for some help on an intro. Why the secrecy about “give me your email address, I would prefer to send it to you”.
    And as for the 2-3 day seminar – when did DMAIC take over as the Six Sigma roadmap. So many supposed BB’s talking about DMAIC as being the the whole show and forgetting it is one small piece of Six Sigma. Hmmm, I’m sure there was more to it once. I have obviously been wasting my time with my participants in talking about knowing or defining core processes, understanding CTQ’s, about establishing them to begin with etc etc etc blah blah blah…….

    0
    #73623

    Russ Tomenendal
    Member

    If you are still sending the presentation out, I would also like a copy. Thanks very much.

    0
    #73650

    Sanjeev Gupta
    Member

    Hi , I am very interested in knowing about Six Sigma and how we can implement it along with any example if any..
    Can you please help me by emailing me some presentations or whatever literature you guys have on it. My email is
    [email protected]
    Sanjeev Gupta
     
     
     

    0
    #73651

    Sanjeev Gupta
    Member

    hi
     i am also interested. please also send me on mail at
    [email protected]

    0
    #91598

    N Ramakumar
    Participant

    Thanks Mr Don Lone – For Metric 101

    0
    #91600

    Reigle Stewart
    Participant

    Dan Lane:
    I just wanted to say how impressed I was with your presentation.  I must admit that it is one of the best I have ever seen.  Very nice job.  I wish others would follow in your footsteps and contribute along the lines you have choosen.
    Reigle Stewart
     

    0
    #91628

    Mikel
    Member

    Dan,
    According to Reigle, your definition of opportunity in your availability example is wrong. You defined it as a minute of uptime. Reigle contends that you should define all of the things you are measuring (the harddrive could crash, a node on the network could go down, a solar storm could bring global communications to a halt,..) I’ll bet if you got creative you could at least multiply those opportunities of yours by 50.
    By the way, I too liked your presentation except for the clipart. You may note that the esteemed Dr. Harry is one of the worlds masters in the use of clipart.

    0
    #133839

    SACHIN KATE
    Member

    Hi! Suneel Khurmi,
     
    This is Sachin here.I am a Trainer/Facilitator, and  I would certainly like to go through the 30 min presentation for Six Sigma. I am presently completing by BB and have to give a presentation to my Group. I have worked on it my self but time is quite large, so would definitely like to check out how you have done it. Would appreciate if you could mail it to me at [email protected]. Your kind co-operation will behighly appreciated.
     
    Thanks
     
    Sachin

    0
    #135770

    parson
    Participant

    I would like a copy of the presentation for training our management. Thanks

    0
    #135785

    BadBoyofCI
    Participant

    What I’ve done is gotten right to the benefits, use some best practice examples.  “This is what it will save us, this is what we’re going to fix and this is how we’re going to do it”  give them the sizzle right away before you show them the bacon.

    0
    #135788

    Navneet
    Participant

    Suneel,
    Could you please provide me your presentation. My e-mail ID is [email protected].
    Thanks,
    Navneet

    0
    #145130

    debbie simpson
    Participant

    I would love a copy of the presentation
    thanks in advance

    0
    #145131

    Marlon Brando
    Participant

    Wish  to  share the  material, I will  send  you  another PP Stuff

    0
    #145132

    Marlon Brando
    Participant

    Excellent  Presentation for  beginners

    0
    #145133

    Marlon Brando
    Participant

    I  would  like  to  receive  a  copy  as  well. 

    0
    #145134

    vishal
    Member

    Hi,
    Could you also send the PP to [email protected]
    Vishal

    0
    #146366

    John Garcia
    Participant

    I recently completed training in six sigma and interested in explaining to team members and upper management.  Could you please send me a copy.
    Thanks,
    John Garcia
    [email protected]

    0
    #146370

    swi
    Member

    Hi ,
    Could u plz send the presentation to me.I m very much interested.

    0
    #146375

    Schuette
    Participant

    A great way to mislead beginners.
    Wasn’t 3.4 DPMO supposed to be dead and buried ? 
    When will all you idiots wake up ?

    0
    #156777

    Susheel
    Member

    mam can u plz tell me abt six sigama, i am a mba student of i.p. university..

    0
Viewing 70 posts - 1 through 70 (of 70 total)

The forum ‘General’ is closed to new topics and replies.