gage rr attribute in minitab
Six Sigma – iSixSigma › Forums › Old Forums › General › gage rr attribute in minitab
- This topic has 1 reply, 2 voices, and was last updated 15 years, 5 months ago by
marvin is a robot.
-
AuthorPosts
-
March 2, 2007 at 5:48 pm #46273
Does anyone know how to set and analyse GR&R atttribute for one pokayoke device , no appraisals in Minitab…
0March 2, 2007 at 5:48 pm #152663
marvin is a robotParticipant@marvin-is-a-robotInclude @marvin-is-a-robot in your post and this person will
be notified via email.Step 1 – Have a Master categorize items in Pass/Fail (at least 20 to 30) Step 2 – Run the items thru the Poka Yoke device and record its ratings per item Step 3 – Run the items thru the Poka Yoke again and record its ratings per item Step 4 – Count the No of times the Poka Yoke ratings agree for 1st and 2nd reading and divide by total items tested (% Repeatability) Step 5- Compute the No of Times the two readings by the Poka Yoke agree and also agree with the Master Reading divided by total items tested (%Effectiveness)
There will be no %Reproducibility because there is only one Poka Yoke device (One Tester). You can key your data into Attribute Agreement Analysis and get these percentages and more.0 -
AuthorPosts
The forum ‘General’ is closed to new topics and replies.