iSixSigma

Gage R&R Using Already Available Average and Standard Deviations in Minitab

Six Sigma – iSixSigma › Forums › General Forums › Methodology › Gage R&R Using Already Available Average and Standard Deviations in Minitab

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 13, 2021 at 10:39 am #253339

    Christian Filion
    Participant

    Hi,

    I am planning a Gage R&R study on Impacte test per ASTM D256.
    This destructive test requires to use 5 samples per run. At the end of the run, the software will give a report with the Average, Standard deviation and all the individual values.
    Presently my techniciens are forced to enter one by one the 5 samples inside the spreadsheet. This can create typos and unnecessary burden!

    Question: How Can I use Minitab (or Excel) to perform Gage R&R knowing the Average and Standard deviation only!

    0
    April 22, 2021 at 2:21 pm #253468

    Chris Seider
    ★ 10 Years ★
    Participant

    Are you doing an MSA for the variation or the mean of the material you tested?

    0
    April 26, 2021 at 9:32 am #253530

    jzable
    Participant

    @cfilion Within Minitab there is an easy-to-use Gage worksheet that I’d recommend. Happy to chat further if you’d like (FYI I work at Minitab).

    0
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.