iSixSigma

Green Blet Project

Six Sigma – iSixSigma › Forums › Old Forums › General › Green Blet Project

This topic contains 3 replies, has 4 voices, and was last updated by  Thanachai puttasomsri 13 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 14, 2006 at 10:19 pm #43727

    Schultz
    Participant

    Im going through a Green Belt certification and I need
    help deciding to pick a project. I work for a textile
    manufacturing company. We make a yield report every
    week and we chart the capacity of our batches to hit our
    target. For instance the target is 96% and our mean every
    week never goes above 94% so we a low Cpk. I was
    thincking that trying to hit the target will be a very good
    project and will like to have some directions on hoow to
    do it.Thanks for the assistance.CDV

    0
    June 14, 2006 at 11:23 pm #139139

    Heebeegeebee BB
    ★★★★★★★★★★
    Participant

    VoC/QFD

    0
    June 15, 2006 at 1:28 am #139142

    elvismeng
    ★★★★★★★★★★
    Participant

    It’s a interinal project. To find the RIGHT project, you have to find the bottleneck in your process based on your data. SIPOC/Flow Chart is a must. Then, the tool Pareto Chart can be helpful to screen out a valuable project.

    0
    June 15, 2006 at 1:53 am #139143

    Thanachai puttasomsri
    ★★★★★★★★★★
    Member

    Let you ask yourself, what are  the cause to  made yield down . Then, ask why with each cause . You might be found some information that able to start the porject.
    Goodluck! 
    Thanachai P
     

    0
  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

The forum ‘General’ is closed to new topics and replies.