Hi All
Six Sigma – iSixSigma › Forums › Forum Basics › Welcome › Hi All
- This topic has 2 replies, 3 voices, and was last updated 10 years ago by
MBBinWI.
- AuthorPosts
- January 16, 2011 at 10:01 am #53696
RasheedParticipant@mamoon_pkInclude @mamoon_pk in your post and this person will
be notified via email.I am industrial engineer and having 5 years experience of manufacturing in textile industry. Six Sigma methodologies is one of my core subject in which i am willing to progress.
I wish the expert over this forum will definitely help me out in understanding and implementing the Six sigma break through improvement successfully.
Thanks
Mamoon ur Rasheed0January 17, 2011 at 1:30 pm #191152
Eric MaassParticipant@poetengineerInclude @poetengineer in your post and this person will
be notified via email.Hi Mamoon, and welcome to the iSixSigma Forum!
Isn’t it great to be open to learning new things? I hope you learn many new approaches and ideas and perspectives that help you grow and progress.
Best regards,
Eric0January 17, 2011 at 3:26 pm #191156
MBBinWIParticipant@MBBinWIInclude @MBBinWI in your post and this person will
be notified via email.Mamoon: The best way to get a meaningful answer here is to do your best to understand and solve the problem, then post your solution/recommendation here if you still have uncertainty. There are many here who will help you if you have done honest effort to try yourself. If you merely throw out your problem and expect others to solve it for you, you will find this forum can be a cruel and heartless place.
Good luck.0 - AuthorPosts
You must be logged in to reply to this topic.