iSixSigma

new for six sigma

Six Sigma – iSixSigma › Forums › Old Forums › General › new for six sigma

This topic contains 15 replies, has 12 voices, and was last updated by  Jose Mendoza 10 years, 8 months ago.

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • February 9, 2009 at 10:10 pm #51829

    ashraf
    ★★★★★★★★★★
    Participant

    dear sirs,
    i m quality control engineer in steel construction company , i m 6 years excepeeince
    i want to learn six sigma , but i dont know
    1- steel workshops need six sigma or not?
    2-which belt should i start
     
                                                                  thank you
     

    0
    February 9, 2009 at 11:12 pm #180920

    Darth
    ★★★★★★★★★★
    Participant

    Dearest Ashraf,I am glad that you are interested in joining the Six Sigma profession. Unfortunately, at this time steel workshops are exempt from using six sigma because of their long history of efficiency and quality. As for color, it is common practice amongst six sigma professionals to choose a belt color that matches their office.

    0
    February 9, 2009 at 11:40 pm #180923

    Devo
    ★★★★★★★★★★
    Participant

    Darth, you are so bad….funny, but bad….

    0
    February 10, 2009 at 12:28 am #180924

    Nolan
    Participant

    I disagree vehemently with Darth. You should choose a belt color that goes well with your hair. Your office is far too temporary to use for colorization.

    0
    February 10, 2009 at 4:38 am #180933

    Obiwan
    ★★★★★★★★★★
    Participant

    Darth
    I assume that this means you have a pink belt?  Or is it purple?  Or orange?
    Obi

    0
    February 10, 2009 at 8:19 am #180936

    Mikel
    ★★★★★★★★★★
    Member

    1. Not.  Anyone who take 3.4 dpmo seriously has rocks in his head.
    2. Always go for the white belt … then you can dye it any colour you want …

    0
    February 10, 2009 at 10:00 am #180937

    ashraf
    ★★★★★★★★★★
    Participant

    I dont haave any belt , but I read little bit in six sigma and i found it very useful  , so i want to learn it .
    i m quality control engineer in steel company
    just i want to know how to start

    0
    February 10, 2009 at 10:48 am #180941

    CT
    ★★★★★★★★★★
    Participant

    1, Yes
    2, I would start at Green and work upwards, this is not for the belt but it should give you the level of training you’ll need to find out if you can do the roll or not. What you will need though is a Black belt mentor.

    0
    February 10, 2009 at 10:56 am #180943

    Jasper
    ★★★★★★★★★★
    Participant

    1. yes, construction industry steel needs six sigma2. safety belt

    0
    February 10, 2009 at 11:28 am #180946

    Taguchi
    ★★★★★★★★★★
    Member

    You need SS
    Start with the “colourless” belt!

    0
    February 10, 2009 at 11:56 am #180951

    Yasser
    ★★★★★★★★★★
    Member

    Shame on you people
    Ashraf , people are making fun with you .
    of course any business can benefit from six sigma and you can start by green belt six sigma please visit
    http://www.asq.org/certification/six-sigma-green-belt/index.html

    0
    February 10, 2009 at 11:58 am #180953

    Taguchi
    ★★★★★★★★★★
    Member

    Not true!
    The start point is the white or yellow belt
     

    0
    February 10, 2009 at 12:45 pm #180957

    RC
    ★★★★★★★★★★
    Participant

    You’re beating a dead horse.

    0
    February 10, 2009 at 1:26 pm #180960

    Darth
    ★★★★★★★★★★
    Participant

    OK Ashraf, since you are persistent about learning about Six Sigma, just look to the left blue bar and find the link called “New to Six Sigma”. That will get you started.

    0
    February 10, 2009 at 1:42 pm #180961

    Mikel
    ★★★★★★★★★★
    Member

    Hey – go imitate Eric from Motorola. Only dumb people imitate Stan.

    0
    February 10, 2009 at 2:51 pm #180964

    Jose Mendoza
    ★★★★★★★★★★
    Participant

    Mr. Ashraf
    In both Lean and Six Sigma endevour you must approach it by Top Down approach method. If the initiative is done the other way your program bound to fail. Making that statement, to have sucess you must advocate and train several belts needed to support your program. In my company we have a Green Belt training available to whoever wants to take it. By having the training available throughout the facility it helps them to understand what is Lean and Six Sigma about and what it can do for them especially in their area.
    I normally conduct the training for the our facility. Several of my colleagues in other facility have a step program. These steps starting from the “Yellow belts” and then to “Green Belts”. But I incorporate both in my Green Belt training. Even though the training is available to everybody, I still recruit personnel that I know will make the impact in the project  just like picking your best player from group.
    Remember it is a team approach and you must train several Green Belts to help you drive this program in order to be successful.
    Good Luck.
    Jose

    0
  • Author
    Posts
Viewing 16 posts - 1 through 16 (of 16 total)

The forum ‘General’ is closed to new topics and replies.