p or np control charts

This topic has 4 replies, 4 voices, and was last updated 13 years, 6 months ago by Theo.

Viewing 5 posts - 1 through 5 (of 5 total)

Author
Posts
January 23, 2007 at 5:59 am #45909

Salmain
★★★★★★★★★★
Member
@Salmain Include @Salmain in your post and this person will
be notified via email.
Dear Experts,
Daily we are auditing 6 in-patient medical records to see if these records comply with a specific standard or no, yes or no data.
The reason behind the sample size (6 records per day) is, we dont have enough time to check more than 6.
My question is, I am bit confused, do I have to use p or np control chat?
Thanks.This thread has been moved to the Healthcare discussion forum. Please click here to continue the discussion.
0
January 23, 2007 at 9:24 am #150951

kin_chen
★★★★★★★★★★
Participant
@kin_chen Include @kin_chen in your post and this person will
be notified via email.
Hi , I’m not the expert you asked ,but I think it’s not so difficult to choose “p-chart ” or “np-chart” . Acturely your basic of use all control charts is to compare with all the data you collected ,if you take out 6 records everyday and no change of the number ,those two charts are the same for your analysis ,but if you had chosen 7 records yesterday and chose 6 records today ,5 tomorrow …,then the ” np-chart ” is meaningless for you to do any analysis ,the “p-chart ” is the only one you have to choose .
You can check any SPC file for the result .
0
January 23, 2007 at 1:23 pm #150957

accrington stanley
★★★★★★★★★★
Participant
@accrington-stanley Include @accrington-stanley in your post and this person will
be notified via email.
What do you intend to use the chart for?This thread has been moved to the Healthcare discussion forum. Please click here to continue the discussion.
0
January 23, 2007 at 7:09 pm #150971

Salmain
★★★★★★★★★★
Member
@Salmain Include @Salmain in your post and this person will
be notified via email.
Monitoring if the records are complyed or not.
Thanks.
This thread has been moved to the Healthcare discussion forum. Please click here to continue the discussion.
0
January 23, 2007 at 10:47 pm #150978

Theo
★★★★★★★★★★
Member
@Theo Include @Theo in your post and this person will
be notified via email.
Firstly, what are you trying to achieve ? What problem are you addressing ?
Is your data binomially distributed ? That is, does it follow the conditions for a binomial distribution, as described in “Advanced Topics in SPC” Wheeler, p255 ? If not, and assuming you have an adequate sampling technique, and that data is from a single source, use an XmR chart.This thread has been moved to the Healthcare discussion forum. Please click here to continue the discussion.
0
Author
Posts