iSixSigma

Painting defect

Six Sigma – iSixSigma Forums Old Forums General Painting defect

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #48280

    Aru
    Participant

    Has anybody done some projects on painting defect reduction? I am to take up a project where I have to reduce the painting defects. If anybody has done a similar project, I would like to hear some thoughts from you on similar projects. Advance thanks.

    0
    #162173

    annon
    Participant

    Yes. But you will need to be more specific.

    0
    #162180

    Brandon
    Participant

    You will most likely find your defects using DOE to isolate the variables impacting the quality of the completed paint job.
    Start by identifying categories of defects, identify the critical X’s, then begin DOE to isolate the causal factors.

    0
    #162188

    Snow
    Participant

    wrong

    0
    #162189

    Brandon
    Participant

    dude – what an enlighting post. Thank you so much.

    0
    #162190

    Snow
    Participant

    Based on your earlier advice, ¨enlightened¨ is a term you might want to stay away from

    0
    #162509

    Sridhar
    Member

    I too in search of some tip on this subject. In our painting line we too face the Quality problem. How can we benchmark. Sheet mental component paint (Electrostatic method) thickness vary from set specification. Has any one having some example / data collection method. Regards,

    0
    #162516

    fake accrington alert
    Participant

    Try  to  apply  the  c-chart to study  your  defects

    0
    #162517

    Yadav
    Participant

    Aru,
    You can start with the data collection on the different defects and link each of the defect to the area of source. Then prepaare a pareto of the ‘area of source’ and prioritise the area of sources.
    Each area of source will have a process associated with it. Prepare  detail process map of the key ‘area of sources’ and then understand the possible causes that can lead to the defect. Emphasize on prevention and then on detection of the defect, so that the customer os always protected.
    Hope this helps.
    Ajit

    0
Viewing 9 posts - 1 through 9 (of 9 total)

The forum ‘General’ is closed to new topics and replies.