Query about Overall entitlement vs sub set entitleme

This topic has 1 reply, 2 voices, and was last updated 15 years ago by BritW.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
June 13, 2007 at 5:26 pm #25507

Schuette
★ 10 Years ★
Participant

@JIM Include @JIM in your post and this person will
be notified via email.

The overall entitlement of a process is 99.8 i.e 2.96 sigma. which means that I should get 2 failures every 1000 bacthes. However if I seperate out the key variables I see that for one of the variables I have an entitlement of 98.2 i.e 2 failures in 100. Can anyone clarify for me why If I get 2 failures in 100 from part of the process my overall entitlement is 99.6
Tks

0

June 13, 2007 at 8:18 pm #61558

BritW
★ 10 Years ★
Participant

@BritW Include @BritW in your post and this person will
be notified via email.

Off the top of my head:
Either your process is linear and the defective part/service doesn’t make it to the next process, the 98.2 entitlement is a FTY measurement and it is fixed before moving on, or the specs of the failure are below the overall spec and doesn’t register as an overall failure at the end of the process.

0
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Healthcare’ is closed to new topics and replies.