iSixSigma

Six Sigma in Medical Laboratories

Six Sigma – iSixSigma › Forums › General Forums › Implementation › Six Sigma in Medical Laboratories

This topic contains 3 replies, has 4 voices, and was last updated by  Mike Carnell 1 month, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 25, 2018 at 2:37 pm #208351

    rabiehalab35
    Participant

    je cherche à appliquer la démarche six sigma dans un laboratoire d’analyses médicales
    D’après vos retours d’expérience quelles sont les étapes à suivre pour l’application de cette méthodologie

    EDITED BY MODERATOR:
    The following translation is via Google Translate.

    I am looking to apply the six sigma approach in a medical analysis laboratory
    Based on your feedback, what are the steps to follow to apply this methodology?

    0
    November 25, 2018 at 4:45 pm #208354

    Katie Barry
    Keymaster

    @rabiehalab35 Did you search our site? We have a whole section of healthcare content that might be of interest. Industries > Healthcare, https://www.isixsigma.com/industries/healthcare/. There are examples that include applying process improvement methods and tools in medical labs.

    0
    November 25, 2018 at 8:19 pm #208363

    Michael Cyger
    Keymaster

    Hi @rabiehalab35,

    Here are a few of my favorite iSixSigma articles on the topic of applying Lean and Six Sigma to laboratories:

    1. IMPROVING LAB PERFORMANCE WITH SIX SIGMA

    2. IMPROVING PROCESS TURNAROUND TIME IN AN OUTPATIENT CLINIC

    3. POWER OF LEAN IN THE LABORATORY: A CLINICAL APPLICATION

    And iSixSigma produced an in-depth project example called Lab On-time Testing Project Example

    Hope that helps move you in the right direction.

    Best,
    Michael

    0
    November 26, 2018 at 11:38 pm #208480

    Mike Carnell
    Participant

    Actually most any post with regards to MSA or turn around time will apply. Being a medical lab doesn’t change anything from any other lab.

    0
  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.