iSixSigma

Want Consolidated Six Sigma Toolset?

Six Sigma – iSixSigma Forums Old Forums General Want Consolidated Six Sigma Toolset?

Viewing 27 posts - 1 through 27 (of 27 total)
  • Author
    Posts
  • #28614

    P
    Participant

    I have an MS-Excel file which consolidated
    1.Almost all basic SS tools definitions
    2.What the tools do
    3.When to use tools
    4.Why to use the tools
    5.Clasification of Discrete/Continuous Data
    and
    6.Minitab Tips…
    Mail me at [email protected] if you want to have it.
    I am also sending it to [email protected] so that it can be globally distributed if required.
    Cheers
    Netra
    [Editor’s Note: Below is the download that Netra submitted. It’s a terrific tool — get it now! Many thanks to Netra for the contribution to the iSixSigma community.}
    Six Sigma Tool Usage Spreadsheet
    Viewing Tip: Usually, you can click on a link to view the document — it may open within your browser using the application (in this case Microsoft Excel). If you are having difficulty, try right clicking the link and selecting “Save Target As…” or “Save As…” to save it to your computer harddrive.

    0
    #71532

    John Adamo
    Participant

    That is way too cool of a tool. 
    VERY  VERY  VERY Nice job!!

    0
    #71534

    Joy
    Participant

    Wow!!! Thanks for sharing this with the community!!Joy

    0
    #71536

    Eoin Barry
    Participant

    Netra – A fantastic contribution! Well done.
    Eoin

    0
    #71538

    Kamal Kakish
    Participant

    Netra,Very impressive and comprehensive. Thanks for sharing this fantastic format

    0
    #71558

    Cordell Fife
    Participant

    Tremendous contribution. Thanks!

    0
    #71586

    P
    Participant

    Its great to know that the tool is of use to all of you. I dont deserve all the applause as I am not the author of this spreadsheet. Am also a learner…when I came across such a nice tool, I thought it would be great if other members of the community also would love to have this. I believe in knowledge sharing!!! and am open to any kind of discussions on this subject.
    you can reach me at [email protected]
    Thanks,
    Netra

    0
    #71587

    Johan.P
    Participant

    Thats a terrific spreadsheet shared by Netra. I suggest that, on behalf of our community, isixsigma forum should award Netra for such a contribution.
    Great work Netra.
    Johan

    0
    #71599

    Joy
    Participant

    Do you know who the author is?  If so, have they given permission to have this distributed.  I’d like to use this with my Black Belts but don’t want to violate copyrights.
    Thanks,Joy

    0
    #71600

    Bob Bechtold
    Participant

    Netra,
            thanks for passing this along, it is fantastic.  If you know the author, please post.  Whoever put this together deserves some recognition.
    Bob

    0
    #71603

    Bobby
    Participant

    I too think it is a great tool.
    In answer to a previous question, the “Home” page of this document lists R. Chapin as the author.
     

    0
    #71608

    Scott Liewehr
    Member

    Netra,
    This is amazing…thanks so much for sharing!
     
    Scott

    0
    #71611

    James A
    Participant

    Netra,  (and R. Chapin)
    Thank you – this is a real help.
    regards
    James

    0
    #71637

    P
    Participant

    Unfortunately I do not know the author but for his name as read by the home page of this document. Will let you all know once I trace him out and all of you can thank him directly.
    Netra

    0
    #71639

    HRV
    Participant

    What can I say??? Its all already been said!!!!
     
    Brilliant discovery.
     
    HRV

    0
    #76065

    Robert Allotta
    Member

    Any updated information on the original author?  I am curious because on the Tool To Use tab, it contains hyperlinks that are not reachable and I was curious as to what you would see if they actually were reachable.
     
    Thanks,
    Robert

    0
    #76099

    TG
    Member

    If you look at the properties for the file that Netra shared with us, it shows that this very useful spreadsheet was written by Ryan Chapin at GE Aircraft Engines.
    Thanks again, Netra!
    TG

    0
    #101693

    Reinaldo Ramirez
    Participant

    NETRA:
    You are now receiving the VENEZUELA´S AWARD OF FRIENDSHIP.
    Reinaldo Ramirez
    Caracas.

    0
    #105157

    S
    Member

    ok…i can’t get it to download with the macros… what settings do i need to change?  it says no signature so macros are disabled…
     
    thanks ahead for the help

    0
    #105163

    newb
    Participant

    wow, thanks.  I will mke much use of this tool. 
    Very nice of you to distribute it!
     
    newb

    0
    #105164

    Mikel
    Member

    It’s in your set up of Excel. Change your security settings to a lower level and the macros will go.

    0
    #105174

    PB
    Participant

    Netra, (and R. Chapin)
    I tried to email you but somehow the outlook hangs up on me. I downloaded the file. It is simply “AWESOME”.
    What

    0
    #105175

    PB
    Participant

    Netra, (and R Chapin)
     
    I tried to email you after I checked out the file but the outlook hangs up on me. I enjoyed the information contained within the file and I find this tool to be SIMPLY AMAZING. CONGRATS TO THE AUTHOR FOR THE TIME AND EFFORT AND TO NETRA FOR POSTING TO THE SITE.
    THANKS.
    PB

    0
    #105176

    Savage
    Participant

    Just a general note to all posters, this spreadsheet has been on this site for over 2 yrs.  It really pays off to search the forum on a regular basis for missed gems like this. 
    Maybe isixsigma could create a library of spreadsheets and uploads for easier searching?? 

    0
    #105203

    John J. McDonough
    Participant

    Maybe something like the “Tools & Templates” link over there on the left?
    –McD
     

    0
    #105256

    Charmed SIX
    Participant

    What about the IP?

    0
    #112068

    Sorour
    Participant

    = Gay.

    0
Viewing 27 posts - 1 through 27 (of 27 total)

The forum ‘General’ is closed to new topics and replies.